Flap Barrier SWG-310A

Flap Barrier SWG-310A:

The SWG-310A Flap Barrier (Optical Turnstile) guarantees fast, smooth and efficient access control in both entry and exit directions.

304 stainless steel framework inside, ABS material top cover with polishing surface, ABS material edge with polishing surface, 304 stainless steel access door with Brushed surface, no soldering at surface and edge.

When power off, the door wings open into the casings to the request of fire protection.

Particularly elaborate design making this security barrier appropriate for almost any building.

With its mechanical design and its embedded electronics, the equipment guarantees high levels of safety.

The system is provided with a standard eclectics interface and is easily integrated with access control system.

It can be used for intelligent control and management of the passage after equipped with different access control system.

Function description: 

The door wings open automatically, permit authorized passage and block unauthorized entry and raise alarms draw the attention of security.

With function of self-examine and alarms, it is convenient for users to maintain and use.

Two directions controlled/one direction controlled, with LED direction indicator.

Reset automatically, go signal will be cancelled if passage through is not completed within pre-set time, the standard default is 10 seconds.

Unit can be adjusted permanent open or close when power off to meet different needs.

Unit can be controlled and administered by remote control

Normally closed operation mode or normally open operation mode can be adjusted via the built-in small keyboard or software.

Anti-pinch function, tailing-proof and intruder alarm function

Working principle:

The user can be authorized via access control system or push button, Confirmation of authorization is provided through a LED display in the top cover of the unit and the door wings open automatically, immediately the user passes the passage, the door wings quickly re-close to prevent tailing-proof, an anti-pinch function will protected the user to prevent pinch.

Technology specifications:

Framework: 304 Stainless Steel

Materials of top cover: ABS

Dimensions: 1470*300*940mm

Material of wing gates: Organic glass, flexible glue

Width of wing gates: 250mm (default)

Width of the lane: 550mm (Standard), Max: 900mm

Net weight: single wing unit: 110kg; double wings unit: 140kg

Interface: RS485

Power supply: 200~240V AC / 100~120VAC 50/60Hz

Main board voltage: 24V

Transit speed: 30-40persons per minute

Working Environment: Indoor/Outdoor (with a tent over)

Temperature: -20 Celsius to 70 Celsius

Humidity: ≤90%

Options:

Access controller and proximity reader

Material of door wings is optional

316 grade stainless steel

Remote control

Write a review for Flap Barrier SWG-310A